Authentic Motogadget mo.blaze disc Chrome Bar-End Turn Signal (Part #6002023) | Left Side Polished Silver Stealth Design
If the cone version offers a sharp, aggressive edge, the Motogadget mo.blaze disc Chrome (Left Side) Part #6002023is a true work of art representing absolute minimalism. Handcrafted in Berlin, this model features an ultra-thin, flat circular design that protrudes a mere 20mm from the bar end. Combined with a transparent crystal disc and a beautifully polished chrome aluminum casing, this turn signal virtually melts into the grips, restoring the cleanest and most authentic look to your handlebars. However, do not let its modest appearance fool you! Upon activation, the crystal disc instantly transforms into a blindingly bright light source, ensuring your maximum safety. This is the ultimate premium jewel for any high-end Classic, Cafe Racer, or Modern Retro build.
TECHNICAL SPECIFICATIONS | Motogadget mo.blaze disc Chrome
GROUNDBREAKING FEATURES & TECHNOLOGY
The elegance of the polished chrome finish conceals a tremendously powerful electronic system inside:
-
TranzLight® Technology (TLT): This optical breakthrough directs the light straight through the crystal disc. Combined with the 7W IntensiLED® system, the unit projects an intensely bright, multi-directional beam, forcing surrounding traffic to immediately recognize your signaling intentions.
-
Absolute Durability: The smart current control IC ensures a massive LED lifespan of over 50,000 hours. Additionally, the IP69 waterproof rating makes the light cluster completely impervious to heavy rainstorms and high-pressure car washes.
CRITICAL INSTALLATION GUIDE
To protect the delicate internal circuitry, you must strictly follow these manufacturer installation guidelines:
-
Safe Handlebar Preparation: Clean and degrease the inside of the handlebar tube (approx. 70mm deep). Drill a 3mm hole at the bottom center of the handlebars to route the wires out. You must thoroughly deburr the edges of this hole so sharp metal does not slice the wiring.
-
Correct Mounting Angle: The light must be mounted horizontally. The handlebar sweep angle towards the rider for the disc series must not exceed 9 degrees.
-
The "4 Turns" Rule: Lightly tighten the M8 nut so the rubber mount expands to fit snugly. Insert the light into the hole and twist the unit clockwise by hand to lock it. NEVER rotate more than 4 turns (Max torque 4 Nm) to avoid snapping the internal hidden wires. Align the Motogadget logo so it faces straight up.
-
Electrical System: Use the provided 3M Scotch Lok connectors for splicing without cutting wires. Due to the 7W LED power draw, you are required to install a load-independent electronic flasher relay (e.g., mo.flash) for accurate flashing rates.
FITMENT & APPLICATION
The included rubber mounts and O-rings ensure a perfect Plug and Play fit for both steel and aluminum handlebars (22mm and 1-inch) with a hollow inner diameter between 14 mm and 21 mm. (Note: SKU 6002023 is exclusively for the Left side. Please remember to order the Right side SKU to complete your motorcycle's synchronized lighting system).
#Monkey89 #Motogadget #moblazedisc #BarEndTurnSignal #StealthIndicators #CafeRacerParts #CustomMotorcycle #MotorcycleTuning #AuthenticParts
