Authentic Motogadget mo.switch basic 3-Button Silver Right (Part #4004023) | CNC Aluminum Handlebar Switch
If you are looking to clean up the right side of your handlebars completely while retaining highly accurate and multi-functional buttons, Boss, the Motogadget mo.switch basic 3-button (Part #4004023) is the definitive answer. This specific version features a gloss black anodized CNC-milled billet aluminum housing, beautifully contrasted with a silver anodized push-button plate for a sleek and elegant touch. Equipped with three ergonomically aligned buttons providing robust mechanical clicks and IP65 water resistance, it delivers a confident shifting feel even when wearing heavy gloves.
TECHNICAL SPECIFICATIONS | Motogadget mo.switch basic 3-Button
| ATTRIBUTE | DETAILED SPECIFICATIONS |
|---|---|
| Brand | Motogadget (Made in Germany) |
| Part Number (SKU) | 4004023 (3-button, silver bezel, right-side configuration) |
| Dimensions |
Width 42.5 mm / Outer housing diameter approx. 45 mm |
| Handlebar Diameter |
Compatible with 22.2 mm (7/8") or 25.4 mm (1") tubes |
| Material Construction |
CNC billet aluminum, gloss black anodized housing, silver anodized button plate |
| Protection Rating |
Highly robust push-buttons, protected against vibrations and splash water (IP65) |
| Current Limitation |
The product can only handle currents of max. 0.1A |
CRITICAL INSTALLATION & WIRING GUIDE
The installation of this switch assembly requires the technician to strictly adhere to the manufacturer's safety rules:
-
Electronic Module Required: This product is not suitable for switching electrical loads directly. All electrical loads must be routed and switched through an electronic switching module (such as the mo.unit).
-
Battery Safety: The vehicle battery must be completely disconnected prior to starting any work on the electrical system. Always disconnect the negative terminal first, and then the positive terminal.
-
Grounding Rules: You must measure the resistance between the negative battery terminal and the handlebar surface. If the resistance is higher than 3 ohms (or if using non-metal handlebars like Carbon), a separate ground wire must be routed directly from the battery to the mo.switch housing ground points.
-
Standard Right-Side Setup: The three buttons on the right-side cluster are typically configured for: Lights, Turn Right, and Starter or Instrument Menu.
-
Incompatible Systems: It is absolutely not possible to use the mo.switch on vehicles where the positive pole is connected to the vehicle frame (often found on older English motorcycles).
#Monkey89 #Motogadget #moswitchbasic #HandlebarSwitch #CustomMotorcycle #MotorcycleTuning #AuthenticParts
