Authentic Motogadget mo.switch basic 3-Button Silver Left (Part #4004022) | CNC Aluminum Handlebar Switch
The Motogadget mo.switch basic 3-button left (Part #4004022) is a universal, high-quality switch assembly designed to refine and upgrade motorcycle handlebars with a 1-inch or 22.2 mm (7/8") tube diameter. CNC-milled from billet aluminium, the housing is anodized in gloss black and is perfectly accented by a silver anodized push-button plate. Equipped with three high-quality black buttons that are always aligned towards the rider, it provides an ergonomic actuation point with a light, mechanical click, ensuring a confident shifting feel even when wearing gloves.
TECHNICAL SPECIFICATIONS | Motogadget mo.switch basic 3-Button
| ATTRIBUTE | DETAILED SPECIFICATIONS |
|---|---|
| Brand | Motogadget (Made in Germany) |
| Part Number (SKU) | 4004022 (3-button, silver bezel, left-side configuration) |
| Dimensions |
Width 42.5 mm / Outer housing diameter approx. 45 mm |
| Handlebar Fitment |
Compatible with 22.2 mm (7/8") or 25.4 mm (1") tubes |
| Material Construction |
CNC billet aluminum, gloss black anodized housing, silver anodized button plate |
| Protection Rating |
Highly robust push-buttons, protected against vibrations and splash water (IP65) |
| Current Limitation |
The product can handle currents of max. 0.1A |
CRITICAL INSTALLATION & WIRING GUIDE
The installation of this switch assembly requires strict adherence to the manufacturer's safety instructions:
-
Electronic Control Module Required: This product is not suitable to switch loads directly. All electrical components (such as lights, turn signals, electric starters, and horns) must be switched by an electronic switching module (i.e., mo.unit)
-
Battery Safety: The vehicle battery must be completely disconnected prior to any work on the vehicle's electrical system. First, disconnect the negative terminal and then the positive terminal.
-
Grounding Rules: Measure the resistance between the negative battery terminal and the handlebar surface. If the resistance is higher than 3 ohms (or if using non-metal handlebars like Carbon), a separate ground wire must be routed directly from the battery to the mo.switch housing ground points.
-
Standard Left-Side Setup: The three buttons on the left-side cluster are typically configured for functions such as: Horn, Turn Left, and Turn Right (or High Beam).
-
Incompatible Systems: Using the mo.switch with the plus pole connected to the vehicle frame (often found on older English motorcycles) is not possible.
#Motogadget #moswitchbasic #HandlebarSwitch #CustomMotorcycle #MotorcycleTuning #AuthenticParts
