Authentic Domino 9A Series Right Switch (Part #0038AB.9A.04-02) | Engine Start & Stop Multi-Function Control
To complete the handlebar control system for your all-terrain build, you cannot overlook the Domino 9A Series Right Switch (Part #0038AB.9A.04-02). Designed as the perfect companion to the left-side cluster, this unit utilizes ultra-durable Tecnopolymers, making it fully capable of handling everything from daily street commuting (On road) to harsh dirt trails (Off road, Trial, ATV). Focusing purely on essential functions like the engine start and the emergency engine stop switch, this assembly guarantees precise operation and absolute safety for the rider.
TECHNICAL SPECIFICATIONS & TUNING | Domino 9A Series Right Switch
| ATTRIBUTE | DETAILED SPECIFICATIONS |
|---|---|
| Brand | Domino |
| Part Number (SKU) | 0038AB.9A.04-02 |
| Shell Material |
Tecnopolymers finished in Carbon black |
| Button Finish |
Black casing with a Glossy black stop switch and a Red start switch (Pantone 1797C) |
| Integrated Functions | Engine start, Engine stop (two stable positions) |
| Rated Electrical Load |
Rated for 12V systems with a 3A current load |
| Handlebar Fitment |
Suitable for standard 22 mm handlebars |
| Wiring Details |
Cable length is 590 mm with a copper section of 0.75 mm² |
| Connector Specs |
Equipped with a Molex 4 positions connector (Ref. 1490-P1) with 4 male couplings, plus 1 separate AMP male coupling |
INSTALLATION GUIDE & CRITICAL TECHNICAL NOTES FROM DOMINO
To ensure stable electrical operation and prevent short circuits, please note the following assembly requirements from the Domino technical drawing:
-
Drainage Positioning: It is absolutely critical to place the switch on the handlebar so that the drainage hole is turned downwards. This orientation ensures that rainwater and mud can freely exit the housing, preventing internal electrical failures.
-
Torque Requirement: The factory tightening torque setting for securing the switch housing is specified between 2 and 2.5 Nm.
-
Low Amperage Warning: In case of applications with an amperage lower than 1A, the validation of the complete system (Switch and control unit) is in charge of the Customer.
#Monkey89 #Domino #DominoRacing #HandlebarSwitch #RightSwitch #EngineStop #AuthenticParts #MotoUpgrade
